Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
802702
8
NOTE: Side and rear exhaust openings are 4 inch
(10.2 cm) ducting. Gas models cannot be vented out
left side of cabinet because of burner housing.
IMPORTANT: The dryer should have sufficient
clearance around it for needed ventilation and for
the ease of installation and servicing. For
maximum drying performance, we recommend
that more clearance be allowed around the dryer
than the clearances that are listed throughout this
manual.
SWD909N
*With leveling legs turned into base.
1 3/8 in. NPT Gas Connection
2 1.5 in. (3.81 cm) Inside Diameter
1.86 in. (4.72 cm) Outside Diameter
SWD909N
23.5 in.
2.0 in.
(5.1 cm)
7.0 in.
*13.1 in.
(33.3 cm)
28 in.
(71.1
*29.6 in. (75.1
*31.1 in. (79
*76.5 in. (194.3
*45.8 in. (116.3
15.4 in.
(39.1
26.9 in.
(68.3
2.3 in.
(6
GAS DRYERS
8.0 in.
(20.3
1
*44.1 in. (112
*36.9 in. (93.8
*14.5 in.
(36.8
24.0 in.
MODELS WITH GRAVITY DRAIN
*4.1 in.
(10.41
4.2 in.
(10.67
2
*64.75 in. (164.47
*55.75 in. (141.6 cm)
1.5 in.
(3.81