Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
F8112201
22
Monthly Preventive Maintenance
Checklist
Machine ____________________________
Operator ____________________________
Month
Checks
Observe All Safety Warnings!
Disconnect power to machine before performing monthly maintenance procedures.
1. Each month OR every 200 hours of operation, lubricate bearings.
2. Clean AC drive fins.
3. Determine if V-belts require replacement or adjustment:
a. Check V-belts for uneven wear and frayed edges.
b. Verify that V-belts are properly tensioned.
c. Verify that V-belts are properly aligned.
4. Remove back panel and check hoses for leaks.
5. Unlock hinged lid and check supply dispenser hoses and connections.
6. Clean inlet hose filter screens. Replace if worn or damaged.
7. Tighten motor mounting bolt locknuts and bearing bolt locknuts, if necessary.
8. Use compressed air to clean lint from motor.
9. Clean interior of washer-extractor, both basket and shell, by wiping with a water-
soaked sponge or cloth.
10. Use compressed air to clean moisture and dust from all electrical components.
11. Remove lower rear panel and inspect drive belts for uneven wear, frayed edges or
cracking. Push on belts and make sure motor can move about its pivot point – this
ensures belts are automatically being tensioned correctly.
12. Remove lower front panel. Check all hoses and temperature probe for leaks,
cracking and deterioration.
13. Using a 5/16 in. hex driver, make sure all hose clamps are tight and all hoses are
secure.
14. Verify motor plate mounting bolt is tight, but that plate is free to pivot.
15. Turn off, inspect and clean any external water and steam filters.
16. Replace all panels.
17. Restore all utility service (power, water and steam) connections.