Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
F8112201
20
Daily Preventive Maintenance
Checklist
Machine ____________________________
Operator ___________________________
Week of: ________________
Days
Checks 1234567
Observe All Safety Warnings!
Disconnect power to machine before performing daily maintenance procedures.
Beginning of Day
1. Inspect water inlet valve hose connections on back of washer-
extractor for leaks.
2. Inspect steam hose connections for leaks, where applicable.
3. Check electrical service connections at back of machine.
4. Inspect door lock and interlock before starting operation:
a. Attempt to start machine with door open.
b. Close door without locking it and attempt to start machine.
c. Close and lock door, start a cycle and attempt to open door while
cycle is in progress.
End of Day
1. Clean AC drive box filter(s).
2. Clean door gasket of all foreign matter.
3. Clean automatic supply dispenser and lid.
4. Clean machine’s top, front and side panels.
5. Leave loading door open at end of each day to allow moisture to
evaporate.
NOTE: Unload machine promptly after each completed cycle to prevent moisture buildup. Leave loading
door open after each completed cycle to allow moisture to evaporate.