Filter
Top Products
Operation
F232088
16
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Cycle Execution
NOTE: The following description is for the factory-
preset program. Prewash times, wash times, final
extract times, fill levels, and water temperatures
may vary depending on jumper configuration. See
the Programming section for more details.
The program timer advances one step every thirty
seconds, except during fills.
Prewash
After the START button has been pressed, the door
unlock button is disabled, the drain valve closes, the
red “ON” indicator light illuminates, and the water
inlet valve(s) opens to fill the machine with water to
high level.
The door unlock button will remain disabled and the
red “ON” indicator light will remain illuminated for
the duration of the cycle.
The cylinder rotates clockwise at wash speed during
each fill.
The amber indicator light labeled “WASH” illuminates
during fill, heat, and agitation steps.
External chemical supply signal output 1 energizes
and supply dispenser compartment 1 flushes
throughout the duration of this fill.
When high water level is reached, the water valve(s)
closes and the washing action begins.
Standard washing action is as follows: 12 seconds
rotation clockwise at wash speed, a
3-second pause, then 12 seconds rotation
counterclockwise at wash speed.
The Bright Colors cycle uses a gentle washing action:
3 seconds rotation clockwise at wash speed, a 12-
second pause, then 3 seconds rotation
counterclockwise at wash speed.
After two minutes of washing action, the drain valve
opens.
Wash
After the machine has drained, the drain valve closes
and the water inlet valve(s) opens to fill the machine
with water to low level.
External chemical supply signal output 2 energizes
and supply dispenser compartment 2 flushes
throughout the duration of this fill.
External chemical supply signal output 1 energizes
and supply dispenser compartment 1 flushes
throughout the duration of this fill.
On standard models, the amber indicator light labeled
“BLEACH” illuminates after water level is reached
and remains illuminated for 1 minute. The machine
resumes the washing action once low water level is
reached. External chemical supply signal output 3
energizes and supply dispenser compartment 3 flushes
once low water level is reached.
On models equipped with auxiliary heat, the timer will
stop and the heating system will activate once the
water level is reached. The timer will resume once
cycle temperature is achieved, illuminating the amber
indicator light labeled “BLEACH,” energizing external
chemical supply signal output 3, and flushing supply
dispenser compartment 3 for 1 minute.
When the wash step is completed, the drain valve
opens. After the machine has drained, the machine
performs a 30-second intermediate extract.
Rinse 1
After the intermediate extract step, the machine closes
the drain valve and opens the cold water inlet valve to
fill the machine to high level.
Once high level is reached, the washing action
resumes for 90 seconds.
The drain then opens. After the machine has drained,
the machine performs a 30-second intermediate
extract.
Rinse 2
Rinse 2 is identical to rinse 1.