Filter
Top Products
Operation
15
F232088
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Cycle Selection
The push button cycle selector switch on the control
module provides a selection of four complete
automatic cycles. See the table below for more
information.
Press the START button to start the selected cycle.
Mechanical Timer Cycles
Step
Time
(Min)*
Water Level
Program Water Temperature
White
Permanent
Press
Colors Bright Colors
Prewash
2
High Warm Warm Cold Cold**
Drain
1
Auxiliary Heat Wash Step Temperature †
194 °F / 90 °C 140 °F / 60 °C 104 °F / 40 °C 86 °F / 30 °C
Wash
4
Low Hot Warm Warm Cold
Drain
1
Extract
0.5
Rinse 1
1.5
High Cold Cold Cold Cold
Drain
1
Extract
0.5
Rinse 2
1.5
High Cold Cold Cold Cold
Drain
1
Extract
0.5
Rinse 3
1.5
High Cold Cold Cold Cold
Drain
1
Extract
4
Shakeout
0.5
*Cycle times are for the factory-preset jumper configuration and do not include fill and heat times. See the Programming
section for more information.
**Auxiliary heat-equipped models only. Standard models do not have a prewash step in the Bright Colors cycle.
†Auxiliary heat-equipped models only.