Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
21
512682
Models without Factory-Equipped Plug
Some models come without an electrical plug
installed. If dryer is not hard wired (refer to
Figure 21), a suitable plug that meets local electrical
standards, including earthing requirements, must be
installed. Refer to dryer nameplate for proper voltage
and Hertz dryer is designed to operate on. Refer to
Figure 51 for nameplate location.
D730I D731I
NOTE: Electrical receptacle must be located so that it is easily accessible with machine in place. If machine is hard
wired, an intermediate shut-off box with a 3 mm gap is required to meet EN60335-1, clauses 24.3 and 22.2 or 3.5 mm
gap is required to meet Standard IEC 60335-1, clauses 24.3 and 22.2. Gap is defined as the minimum contact
separation of each pole in the switch between the “ON” and “OFF” positions.
Figure 21
D730I
D731I
POWER CORD HARDWIRE