Filter
Top Products
504523 13
STEP 4:
Wipe Out Inside Of Dryer
Before using dryer for the first time, use an all-purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside dryer drum.
STEP 5:
Plug in the Dryer
Refer to Section on Electrical Requirements, and
connect the dryer to an electrical power source.
STEP 6:
Check Installation
Refer to Installer Check on the back cover of this manual
and make sure that dryer is installed correctly.
D340I
D006IE0B
ELECTRIC
D254IE0B
GAS
Plug core into seperately fused
15 Amp circuit.
Connect to 30 Amp circuit.