Filter
Top Products
Operating Instructions
19
Changing the spin speed/Selecting the
rinse hold function
If required, change the spin speed for the final
spin/select rinse hold:
Changing the spin speed
0 Continue pressing the spin speed/o (RINSE
HOLD) button until the indicator for the desired
spin speed is illuminated.
3
If you do not change the spin speed, the final spin
will be adjusted automatically depending on the
type of wash cycle:
The speed for the intermediate spin cycle is dependent on the wash cy-
cle selected and cannot be altered.
Selecting the rinse hold function
0 Continue pressing the spin speed/o (RINSE HOLD) button until the
indicator o (RINSE HOLD) for the desired spin speed is illuminated.
3
If o (RINSE HOLD) is selected, the washing will remain in the final
rinse water and will not be spun.
The washing will not be spun throughout the entire wash cycle.
As a result the cycle is a very quiet one. o (RINSE HOLD) is therefore
especially suitable for washing at night.
Note: The laundry remains lying in the water until you drain or spin
(see section “Ending a wash cycle”). After 18 hours however, it is auto-
matically drained and pumped.
– t (COTTONS/LINEN) 1200 revolutions per minute
– } (EASY CARES)/< (EASY IRON) 900 revolutions per minute
– Ã (DELICATES) 700 revolutions per minute
– s (WOOLLENS)/P (Hand Wash) 900 revolutions per minute