34 VISIONEER 9750 SCANNER USER’S GUIDE
The OneTouch Button Panel also opens with the description of the
selected settings.
To Refresh the OneTouch 4.0 settings, click the Refresh button on
the OneTouch Properties window.
If you make changes in the OneTouch Properties window, then
click the Apply button, the information in the OneTouch panel
will update to show the new settings. See “Configuring the
OneTouch Buttons” on page 37 to change settings.
You can also click the tabs at the top of the OneTouch Properties
window to see the settings of the other buttons.
3. When you’re ready to scan, just click (not right-click) the button on
the Button Panel.
Important: The OneTouch Properties window must be closed before
you can scan from the Button Panel.
The icon indicates the Destination
Application for this setting.
Your document will be scanned
with these settings.
