Tripp Lite B072-016-IP4 Manual

next previous

4. Local Console

This chapter explains how to operate the NetCommander IP via the local console. The local console allows you to access connected

computer/servers,conguretheKVM’snetworksettings,andtoconguresomemorebasicsettingsspecictolocalaccess.

To display the OSD:

1. From the local keyboard, press the left Shift key twice. The

OSDMainwindowappears.

Lines with sun icons in the PM column show active computers/

servers. A computer that is connected, but is powered-off, does

not have a sun icon. When a server is busy (when an account is

accessing it in an Exclusive Session), the entire line appears in red

characters.

Navigating the OSD:

• To move the highlight bar throughout the list, press the [h] and [i] arrow keys.

• To jump from one column to the next (when relevant), press the [Tab] key.

• ToexittheOSDorreturntoapreviouswindowwithintheOSD,pressthe[Esc]key.

To select a computer:

1. Navigate to the desired port using the [h] and [i] arrow keys, or type the two-digit port number of the desired computer.

2. Press the [Enter] key. The selected computer is accessed.

13-11-081.indd 11 11/26/2013 3:31:50 PM