Tripp Lite B072-016-IP4 Manual

next previous

3. Conducting a Remote Session

A remote session allows accounts IP access to computer/servers and serial devices connected to the KVM. In a remote session, accounts

can access computers/servers, power cycle or turn power to a Target Server Off/On, virtually mount an .iso ﬁle, and conﬁgure the remote

session settings. The sections that follow explain the features of a remote session, and how to use them.

3.1 Starting a Remote Session

To start a remote session:

1. Open the Web Conﬁguration Interface, and click on the

icon in the menu bar. The My Targets screen appears, displaying

onlythoseportsthatthelogged-inaccountispermittedtouse.Foradministratoraccounts,agraphicoftheKVM’sbackpanelis

displayed in between the Toolbar and Data Pane.

2. A remote session can be initiated in one of four ways:

• Select a port from the Data Pane of the My Targets screen, and click on the Display icon in the toolbar.

• Select a port from the Data Pane of the My Targets screen, and press the [Enter] key.

• Double-clickonaportintheData Pane of the My Targets screen.

• Administrators Only – Double-clickonaportinthegraphicoftheKVM’sback-panel.

Note: A Target Server with a Remote Exclusive Session or Local Exclusive Session status is being accessed by another account in

Exclusive Mode (see the Exclusive Session section in the owner’s manual for details), and cannot be accessed. A Target Server with a

Remote Session status is being accessed by another account in Share Mode, which allows for up to 5 users to access the port at the

same time (see the Sharing a Remote Session section in the owner’s manual for details).

3. Uponinitiatingaremotesessioninoneofthesefourways,thescreenoftheselectedTargetServerappearsinsidearemoteconsole

window with the remote session toolbar displayed.

13-11-081.indd 10 11/26/2013 3:31:49 PM