35
RT-PRC002-EN
Performance
Data
(25 Ton)
Standard Efficiency
*Indicates both downflow and horizontal units.
Table PD-21 — Evaporator Fan Performance — 25 Ton — TC*300B
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
7.5 HP Standard Motor & Low Static Drive Accessory 7.5 HP Standard Motor & Sheaves
7000 — — — — 593 2.42 619 2.62 643 2.80 667 2.98 690 3.16 712 3.35 733 3.53 754 3.73
7500 — — 595 2.66 624 2.88 649 3.10 673 3.31 695 3.50 717 3.68 738 3.88 759 4.08 779 4.28
8000 595 2.92 627 3.16 655 3.39 679 3.63 702 3.86 724 4.07 745 4.28 766 4.48 786 4.68 805 4.90
8500 628 3.47 659 3.73 686 3.97 710 4.23 732 4.47 754 4.71 774 4.94 794 5.15 813 5.36 832 5.58
9000 661 4.08 691 4.36 717 4.62 741 4.89 763 5.15 784 5.41 803 5.66 822 5.89 841 6.12 859 6.35
9500 695 4.76 723 5.06 749 5.34 772 5.62 794 5.90 814 6.18 833 6.45 852 6.71 870 6.95 887 7.19
10000 729 5.52 755 5.84 781 6.13 804 6.42 825 6.72 844 7.01 863 7.31 881 7.59 899 7.86 916 8.11
10500 762 6.35 788 6.69 812 7.00 835 7.31 856 7.62 875 7.93 894 8.24 911 8.54 — — — —
11000 796 7.27 821 7.63 844 7.96 867 8.3 887 8.60 — — ————————
Factory supplied motors, in commercial equipment, are
definite purpose motors, specifically designed and tested
to operate reliably and continuously at all cataloged
conditions. Using the full horsepower range of our fan
motors as shown in our tabular data will not result in
nuisance tripping or premature motor failure. Our
product’s warranty will not be affected.
For Standard Evaporator Fan Speed (RPM), reference Table PD-31.
For Standard Motor & High Static Drive Accessory Fan Speed (RPM), reference Table PD-32.
For Standard Motor & Low Static Drive Accessory Fan Speed (RPM), reference Table PD-34.
Fan motor heat (MBH) = 3.15 x Fan BHP
Data includes pressure drop due to wet coils and filters.
No accessories or options are included in pressure drop
data. Refer to Table PD-35 to determine add’l static pressure drop due to other options/accessories.
Note:
1. For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan
Speed” tables to determine operating range.
Table PD-21 — Evaporator Fan Performance — 25 Ton — TC*300B — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
7.5 HP Standard Motor & Sheaves
7000 776 3.95 798 4.18 820 4.40 841 4.62 862 4.84
7500 798 4.48 818 4.71 839 4.95 860 5.19 880 5.42
8000 824 5.11 842 5.32 860 5.55 880 5.80 899 6.06
8500 850 5.81 868 6.03 885 6.26 902 6.49 920 6.74
9000 877 6.58 894 6.81 911 7.05 928 7.29 944 7.53
9500 904 7.43 921 7.67 938 7.92 954 8.17 970 8.42
10000 933 8.36 949 8.62 — — — — — —
10500 — — — — — — — — — —
11000—— —— —— —— ——
7.5 HP Standard Motor & High Static Drive Accessory
7.5 HP Standard Motor & Sheaves
7.5 HP Standard Motor & High Static Drive Accessory
