48
USER SETTINGS
SELECTING AUDITING MODE SETTINGS
1
Hold down the [Light] key ( ) until
the alarm indicators ( , , , ,
) blink.
"- -" appears in the
display.
2
Enter the program number with the
numeric keys.
• See "AUDITING MODE
SETTINGS" (p.00 to
p.00) for the program
numbers.
• The selected program
number blinks.
• To select "Auditing
Mode", enter "10".
3
Press the [START] key ( ).
• The selected program
number stops blinking
and lights steadily.
• The currently selected
setting code blinks in
the 1st digit of the
display.
4
Enter a setting for the selected
program.
• For the procedure for
each setting, see
"AUDITING MODE
SETTINGS". (p.00)
• For the setting codes,
see "AUDITING MODE
SETTINGS". (p.00 to
p.00)
• The selected setting
code blinks.
5
Press the [Light] key ( ) to complete
the settings.
The alarm indicators ( , , , , ) go
off and the display returns to the number of
copies display.
If you enter the wrong number, press the
[CLEAR] key ( ) and then enter the correct
number.
• If you enter the wrong number, press the
[CLEAR] key ( ) and return to step 2.
• If "E" (error code) blinks in the first digit of
the display, press the [CLEAR] key ( )
and return to step 2.
Note
Note
