21
COPY FUNCTIONS
2
SETTING THE NUMBER OF COPIES
Press the numeric keys to set the number of copies.
● The set number of copies appears in the display. A
maximum of 99 copies (factory default setting) can
be set.
● If you wish to make only a single copy, copying is
possible with the display showing "0".
Important note when making a large number
of copies
The maximum number of copies can be changed
from 99 to 999 in the user programs. (p.00)
When the maximum number of pages that can be
held in the output tray (250) are output, copying will
temporarily stop. When this happens, promptly
remove the copies and press the [START] key ( )
to resume copying. Copying will also stop after 500
pages and 750 pages. Remove the pages and
resume copying in the same way.
REDUCTION/ENLARGMENT/ZOOM
Reduction and enlargement ratios can be selected automatically with the [AUTO IMAGE] key or manually with the
[PRESET RATIO] selector keys ( , ) and/or the [ZOOM] keys ( , ). The zoom function enables precise
copy ratio selection from 25% to 400% in increments of 1%. Ratios that can be selected will vary depending on
whether the original is placed on the document glass or in the SPF/RSPF.
AUTOMATIC RATIO SELECTION
1
Place the original(s) in the document
feeder tray or on the document glass.
2
If the original is placed on the
document glass, select the original
size. (P.00)
3
Use the [TRAY SELECT] key to select
the paper tray with the desired paper
size.
This feature will not work
when using copy paper
of non-standard size or
when using the bypass
tray.
If you enter the wrong number, press the
[CLEAR] key ( ) and enter the correct
number.
Note
Original position Selectable ratios
Document glass 25% – 400%
SPF/RSPF 50% – 200%
When automatic ratio selection is enabled, the ratio cannot be selected manually.
Note
Automatic ratio selection can only be used
when the original size is 11" x 17", 8-1/2" x
14", 8-1/2" x 11" or 8-1/2" x 11"R. It cannot be
used for other sizes.
Note
