36
CONVENIENT COPY FUNCTIONS
5
Select the number of copies and other
settings, and press the [START] key
().
The copy is delivered to the output tray.
ERASING SHADOWS AROUND THE
EDGES OF A COPY
(Erase copy)
● This feature is used to erase shadows that appear around the edges of copies of books and other thick originals.
The shadows are erased according to the size of the paper.
● The feature can also erase the shadow that appears down the center of books and other originals that open up.
(CENTER ERASE)
● The factory default setting for the width of the erasure is approximately 1/2" (10 mm). The width can be changed
in the user programs.
1
Place the original(s). (p.00)
2
Select the original size. (p.00)
3
Press the [ERASE] key to select the
desired erase mode.
To select the "EDGE +
CENTER ERASE" mode,
press the [ERASE] key
until both the EDGE and
CENTER indicators light
up.
4
Select the number of copies and other
settings, and then press the [START]
key ( ).
The copy is delivered to the output tray.
• To cancel margin shift, press the [MARGIN
SHIFT] key repeatedly until the MARGIN
SHIFT indicator is off.
• When margin shift is used in combination
with automatic two-sided copying, a margin
is also created automatically on the back
side of the paper directly behind the margin
on the front side.
Note
AA
AB
AB
AB
AB
EDGE
CENTER ERASE
EDGE + CENTER ERASE
Original Final copy
Original Final copy
Original
Final copy
• Center erase cannot be used in combination with dual page copy.
• Erase copy cannot be used in combination with 2 IN 1/4 IN 1 copy. (p.00)
• Erase copy cannot be used when the paper is a special size.
• Erase copy cannot be used when copying from the bypass tray.
Note
To cancel erase copy, press the [ERASE] key
repeatedly until the ERASE indicators are
both off.
Note
