Operation
20
1
I
Press the {
{{
{Proof}
}}
} key and check
the image density and the image
position of the proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
==
=] key. ⇒ P.23 “Adjusting the
Position of Printed Images”.
❒ If the image density is slightly
dark or light, adjust the image
density using the {W
WW
W}{V
VV
V} keys.
⇒ P.24 “Adjusting the Image
Density of Prints”.
J
Enter the number of prints re-
quired with the number keys.
Note
❒ To change the number entered,
press the {Clear/Stop} key and
enter the new number.
K
Press the {
{{
{Print}
}}
} key.
Note
❒ To stop the machine during a
multi-print run, press the {Clear/
Stop} key.
❒ To return the machine to the ini-
tial condition after printing, and
then press the {Clear Modes/Ener-
gy Saver} key.
