Optional Functions
128
2
Color Printing Using the Optional Color
Drum
Color drum units are available as op-
tions in addition to the standard black
unit. For making color prints, a sepa-
rate drum unit is necessary for each
color.
Note
❒ If the ink on the color drum dries,
use the Quality Start mode. ⇒ P.74
“Quality Start Mode”.
Making Color Prints
A
Make sure that the color drum in-
dicator is lit.
B
Press the {
{{
{Start}
}}
} key.
C
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
==
=] key (⇒ P.23 “Adjusting the
Position of Printed Images”).
D
Make your prints.
Changing the Color Drum Unit
A
Open the front door.
B
Lower the drum unit lock lever
B1.
Note
❒ Make sure the green light be-
side the drum unit lock lever is
on before sliding out the drum.
If the light is off, close the front
door, wait for five seconds, and
then open.
