Ricoh JP8000 Manual

A SERVICE OF

next previous

User Tools Menu

149

4

7. On Line Mode

7 Key Operator Code Use to turn Key Operator Code mode on or off.

Note

❒ Default: Not to use

8Reg/Chg Key-

OpCode

You can register or change key operator codes. (up to 4 digits)

9 Restrict. Access In Key Counter mode, you have to set the key counter before

making prints. (To turn on Key Counter mode, contact your

service representative.) If Key Counter mode is on, Restricted

Access is turned on (“To use”) automatically. If you turn Re-

stricted Access off (“Not to use”), you can make prints without

inserting the key counter.

Note

❒ Default: Not to use

No. Mode Description

1 Set aut-O/L def Specifies whether Auto On Line mode is set to On or Off when

power is switched on or after mode settings are cleared.

Note

❒ Default: On

2 Ppr. Size [Online] Specifies the paper size when you press the {

On Line

} key.

Note

❒ Default: Auto