A SERVICE OF

logo

Standard Printing
19
1
Standard Printing
A
Make sure that the machine is
ready for printing.
B
If user codes are turned on, enter
your user code with the number
keys, and then press the {
{{
{q
qq
q}
}}
} key.
Reference
P.18 Entering a User Code to
Use the Machine
C
Make sure that there are no previ-
ous settings remaining.
Note
To clear any previous settings,
press the {Clear Modes/Energy
Saver} key.
D
Lift the platen cover.
Note
Be sure to lift the platen cover
more than 30cm, 12".
E
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
F
Lower the platen cover.
G
Make your desired settings.
H
Press the {
{{
{Start}
}}
} key.
A trial print is delivered to the pa-
per delivery tray.
TPEH010E
ZDCH110E