A SERVICE OF

logo

Open as PDF
next previous
Setting Up 1 – 5
8. The platen knob should already be fitted to the right hand side of the
printer. However, if this is not the case, or if it has been removed for
any reason, align its slot with the spigot on the platen shaft.
9. Try running a self test to make sure your new printer is working
correctly. Insert a piece of computer paper (with sprocket holes) or
a single sheet of typing paper into the printer as you would insert it
in a typewriter. If you are unfamiliar with typewriters, here is the
method:
a. Open the paper release lever by sliding it towards you.
b. Insert the paper as far as you can into the slots provided by the
black paper guides.
Paper guides