A SERVICE OF

logo

2 – 10 Operating Your Printer
NOTE: When letter-size paper is used, set the cut sheet guide to the line mark on the
paper separator. 80-character width text (10 CPI) is then positioned centrally on the
paper.
6. Insert a single sheet along the cut sheet guide until it reaches the
pinch roller. Be sure to keep the paper inside the platen ends
otherwise the built-in sprocket pins will tear it.
7. Open the paper bail lever by pulling it towards the front of the
printer. The sheet of paper will be pulled around the platen.
8. Close the paper bail lever, ensuring that the paper has been positioned
correctly.
9. Press the SELECT button to bring the printer ON-LINE.
Line mark
Cut sheet guide