A SERVICE OF

logo

Setting Up 1 – 3
5. Place the black ribbon cartridge on the ribbon cartridge holder. The
easiest method is to tilt the back of the cartridge so that it slides into
the area of the plate that is nearest the front of the printer, then lower
the top of the cartridge (where the plastic ribbon shield is located)
over the print head. The tabs on both sides of the cartridge should
align perfectly with the inserts on the print head plate.
Important: Only use genuine OKI ribbon cartridges in your printer. Do not remove the
ribbon shield.
Ribbon cartridge holder
Ribbon shield
Ribbon cartridge
Holding position
Print head
Column indicator
Ribbon shield