4 - 29
No. 99MBC032A
4. SETTING UP THE MEASURING CONDITIONS
3) Setting the GO/NG judgment criteria (by multi-limit selection)
In this example assume the following:
L1=12.49mm
L2=12.494mm
L3=12.498mm
L4=12.502mm
L5=12.506mm
L6=12.51mm
PROG
.4
12
9
PROG
Step 1: The previously entered setup value for L1 is
displayed.
Enter “12.49”.
PROG
Step 2: Press the
ENT
key.
The setup data will be saved in memory and the
operation automatically proceeds to the L2 setting.
Step 3: Enter “12.494”, which is the setup data for L2.
4
.4
12
9
PROG
PROG
Step 4: Press the
ENT
key.
The setup data will be saved in memory and the
operation automatically proceeds to the L3 setting.
Step 5: As with L1 and L2, set L3, L4, and L5.
PROG
.5
12
1
PROG
Step 6: Enter “12.51”, which is the L6 setup value.
PROG
Step 7: Press the
ENT
key.
The setup data will be saved in memory and the
operation automatically proceeds to the reference
value setting.
