The Keypad 27
E-EQ-MX3CEOGWW-A-ARC MX3-CE Installation and Operator’s Guide
Keypad LED Functions
Figure 24 Function LEDs
Across the top of the keypad are LEDs that provide visual cues to current computer operation.
When the LED is not illuminated, the function is inactive.
LED When illuminated ...
2nd
The next keypress is a 2
nd
keypress.
• Orange when on and unlit when off.
ALT
The next keypress is an ALT keypress.
• Orange when on and unlit when off.
CTRL
The next keypress is a CTRL keypress.
• Orange when on and unlit when off.
SHFT
The next letter is the uppercase letter on alpha keys and the shifted character on
the numeric keypad keys.
• Orange when on and unlit when off.
CAPS
Uppercase letters are active until the CAPS key sequence is pressed again.
• Orange when on and unlit when off.
SCNR
Barcode scanner function, affected by both tethered scanners and the scanner
endcap.
• Red - scanning.
• Green - good scan.
• Unlit - scanner is inactive.
BATT B
Backup Battery. When illuminated, the backup battery is charging. When unlit,
the Backup Battery is not charging
STAT
Status Indicator.
• Blinking Green when display Suspend state begins.
BATT M
Main Battery. When illuminated, main battery capacity is low.
• Red – low battery.
• Blinking Red – power fail.
• Unlit - Main Battery is fully charged.
CHGR
Charger. When on, the MX3-CE is receiving external power either from the DC
power jack or the MX3-CE is seated in a powered cradle.
• Red - Main Battery is charging.
• Green - battery charge is complete and the MX3-CE is connected to
external power through the power jack or a powered cradle.
