Quick Start 7
E-EQ-MX3CEOGWW-A-ARC MX3-CE Installation and Operator’s Guide
Insert Main Battery
As soon as the battery is inserted into the MX3-CE, the unit is automatically powered on (or
returns from the Critical Suspend or Suspend state).
Note: New batteries must be charged prior to first use. This process takes up to four hours in
an LXE Multi-Charger and eight hours with an external power source attached to the
MX3-CE.
Figure 7 MX3-CE Battery Contacts
The MX3-CE Battery Compartment is located at the bottom of the back of the computer. The
arrows in the figure above point to the battery and cradle contacts in the computer.
Figure 8 Main Battery
Place the battery in the compartment, making sure the side of the battery with six contacts matches
up with the battery contacts in the computer battery compartment. Do not slide the battery
sideways into the compartment.
Firmly press the battery into the compartment until the Retaining Clip on the battery clicks. The
battery is now securely fastened to the MX3-CE.
