Warnings and Labels 3
E-EQ-MX3CEOGWW-A-ARC MX3-CE Installation and Operator’s Guide
Warnings and Labels
Caution
This device is intended to transmit RF energy. In accordance with FCC and Industry Canada radio-
frequency safety regulations, when operating this device with the Hip-Flip accessory, it should be used
in accordance with the user's instructions. Additionally, the user should take care to ensure that a
minimum separation distance of 20cm (7.8 in.) is maintained from the antenna to nearby persons. Use of
this device in a manner not consistent with these instructions can increase the risk of RF exposure.
• Do not look into the laser’s lens.
• Do not stare directly into the laser beam.
• Do not remove the laser caution labels from the MX3-CE.
• Do not connect the laser barcode window to any other device. The laser barcode window is
certified for use with the MX3-CE only.
Caution:
Laser radiation when open. Please read the caution labels.
Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Figure 1 CDRH / IEC 825 Caution Label
Location - MX3-CE, Back
Figure 2 Caution Label - Scanner
