12 Quick Start
MX3-CE Installation and Operator’s Guide E-EQ-MX3CEOGWW-A-ARC
Set the Display Blanking Timer
Note: Refer to the section titled "Power Modes" later in this manual for information relating to
the power states of the MX3-CE.
Select Start / Settings / Control Panel / Display Properties / Blanking tab. This option is also
available by selecting Start / Settings / Control Panel / Power Properties / Blanking tab.
Change the parameter values and tap OK to save the changes.
The first option should be set when the MX3-CE will be running on battery power only. The
second option should be set when the MX3-CE will be running on external power (e.g. AC
adapter, cigarette adapter, powered cradle). The default value for the battery power timer is 15
seconds. The default value for the external power timer is 2 minutes.
Set the MX3-CE Power Off Timer
Note: Refer to the section titled "Power Modes" later in this manual for information relating to
the power states of the MX3-CE.
Select Start / Settings / Control Panel / Power Properties / Power Off tab. Change the
parameter values and tap OK to save the changes.
The first option should be set when the MX3-CE will be running on battery power only. The
second option should be set when the MX3-CE will be running on external power (e.g. AC
adapter, cigarette adapter, powered cradle). The default value for the timer is 5 minutes.
