Quick Start 13
E-EQ-MX3CEOGWW-A-ARC MX3-CE Installation and Operator’s Guide
Set The Audio Speaker Volume
Note: An application may override the control of the speaker volume. Turning off sounds saves
power and prolongs battery life.
The audio volume can be adjusted to a comfortable level for the operator. The volume is increased
or decreased one step each time the volume key is pressed. The MX3-CE has an internal speaker
and a jack for an external headset.
Using the Keypad
Note: Volume & Sounds (in Control Panel) must be enabled before the following key sequences
will adjust the volume.
To adjust speaker volume, locate the <F8> key at the top of the keypad. Adjust the speaker
volume by pressing the:
• 2
nd
key, then the <F8> key to enter Volume change mode.
• Use the Up Arrow and Down Arrow keys to adjust volume until the speaker volume is
satisfactory.
• Press the Enter key to exit this mode.
Using the Touch Screen
Select Start / Settings / Control Panel / Volume & Sounds / Volume tab. Change the volume
setting and tap OK to save the change.
Figure 13 Adjust Audio Volume
