Quick Start 9
E-EQ-MX3CEOGWW-A-ARC MX3-CE Installation and Operator’s Guide
Connect Audio Jack (Optional)
The MX3-CE audio jack is located on the endcap.
Figure 10 Connect Audio Jack
Insert the barrel end of the connector into the MX3-CE audio jack and push in firmly.
Note: The audio option draws power from the battery.
Attach Hand Strap (Optional)
An elastic handstrap is available for the MX3-CE. Once installed, the handstrap provides a means
for the user to secure the computer to their hand. It is adjustable to fit practically any size hand and
does not interfere with battery charging when the MX3-CE is in a cradle.
Figure 11 MX3-CE With Handstrap Installed
Tool Required: #1 Phillips Screwdriver
Installation
1. Place the unit in Suspend mode or turn the unit off to prevent accidental key presses
when you are attaching the handstrap.
2. Place the MX3-CE, with the screen facing down, on a flat stable surface.
3. Attach the hand strap to the MX3-CE with the screws and washers provided.
4. Test the strap's connection making sure the MX3-CE is securely connected to each
end of the strap.
Periodically check the hand strap for wear and the connection for tightness. If the hand strap gets
worn or damaged, it must be replaced.
