54 Regulatory Notices and Safety Information
MX6 PPC User’s Guide E-EQ-MX6PCOGWW-C-ARC
R&TTE Directive Requirements (Applies only to equipment operated within the EU/EFTA)
Information to User
A label on the exterior of the device should resemble the label shown below. The product is marked
with the label below in accordance with the Class II product requirements specified in the R&TTE
Directive, 1999/5/EC.
LXE Part
Number
Use of this device is permitted in EU/EFTA.
The equipment is intended for use throughout the European Community. Its authorization for use in
France is restricted as follows:
PAN European Frequency Range: 2.402 – 2.480 GHz
Restricted Frequency Range for use in France: 2.448 – 2.480 GHz
The CE mark on this product indicates that the system has been tested to and conforms with the
provisions noted with the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/EEC
Low Voltage Directive.
Approvals
Product EMI / EMC Standards Safety Standards RF Standards
MX6 FCC Part 15 Subpart B
EN 55022 Class B
EN55024
EN60950
FCC 15.247
RSS 210
ETS 300 328
Transceiver
Transceiver Specifications
MX6 with 802.11b EN 300 328-2:2000
EN 301 489-1:2000
EN 301 480-17:2000
EN 60950:2000
EN 50361:2001
The following is the required safety label that appears on the back panel of the MX6 RF terminal equipped with an
802.11 radio.
