A SERVICE OF

logo

22 Adjust the Handstrap
MX6 PPC User’s Guide E-EQ-MX6PCOGWW-C-ARC
Adjust the Handstrap
Figure 17 Handstrap
The MX6 PPC has an integrated elastic hand strap that provides a comfortable, secure grip on the
unit. It is attached to the MX6 PPC with a clip on the bottom panel. The handstrap should be
disconnected from the bottom clip when the main battery is to be removed or replaced. The
handstrap can be removed from the MX6 PPC if desired.
Prior to adjusting the handstrap, pull down on the handstrap and insert the bottom assembly into
the slot at the bottom of the MX6 PPC. Insure that both ends of the bottom assembly are secure.
Open the closed loop fastener tabs and adjust the handstrap for a comfortable, secure fit. Press the
closed loop fastener ends together.