Setting Display Backlight Action 15
E-EQ-MX6PCOGWW-C-ARC MX6 PPC User’s Guide
Setting Display Backlight Action
Access: Start | Settings | System | Backlight tab
The parameter settings in Start | Settings | System | Backlight tab establish when the display
backlight is turned on and off. The Keypad Backlight key (located at the lower right of the 35-
key keypad and below the Power key on the 56 key keypad) has no effect on display backlight
settings. The display backlight settings have no effect on the keypad Backlight setting.
Figure 11 Set Backlight
Exit and save any changes by tapping OK on the command bar, or pressing Enter on the keypad.
When the MX6 PPC is not in the Suspend state, and the display backlight is off, the display
backlight is toggled on when any key, including the keypad backlight key, is tapped (if “Turn on
backlight when a button is pressed or the screen is tapped” is checked).
If the MX6 PPC is in Suspend, pressing the keypad backlight key has no effect – the MX6 PPC
remains in the Suspend state.
