- 31 -
Voice On/Off
The Voice On/Off buttons allow you to quickly mute a voice by turning it off. When
the voice is on, the button glows green and will be unlit when turned off.
Phase Inv
The Phase Invert buttons are very useful for special effects, especially when several
voices are phase inverted and panned hard left and right. To invert the phase of a
voice, click the associated button to change its label from Off to Ø, thus lighting it
green as a visual reference.
Frequency
These eight parameters are the center frequencies for each of the filters. They are
displayed in Hertz and Kilohertz and each has a range of 20 Hz to 20 kHz. This
parameter is tied to the Note Name parameter so that you can see the musical note
for any given frequency.
Note Name
Like the Frequency parameter, Note Name adjusts the center frequency for each of
the filters. In this case, the values are displayed as the actual note names allowing
you to set the filter frequencies more musically. When MIDI note information is routed
to this plug-in and a Note Mode is chosen, you’ll see the actual MIDI notes displayed
in this field. As above, this parameter is connected to the Frequency parameter,
displaying the frequency for any given musical note.
