- 24 -
Frequency
This is a master control that affects all eight filter Frequency parameters. It behaves
as an offset parameter meaning the frequency value here is added to the individual
frequency values of each filter. This master offset parameter displays its values in
semitones, allowing the musical pitch of the filters to be easily set over a 256 semitone
range.
Q Factor
This control simultaneously scales the Q factor, or “resonance” of all eight filters.
Pan
This global Pan controls the width of the stereo field. At the maximum setting of 100%,
the stereo image is normal. At 0%, the image is mono. At the minimum setting of
–100%, the left and right channels are swapped allowing you to quickly invert the
overall stereo image.
Feedback Delay
This parameter determines the length, or delay time of the feedback loop. This
parameter can be set using its associated fader or the small pointer in the Beat
Grid for quantized control. As you can see from the signal flow diagram presented
earlier, this delay is independent of the eight filtered delays and is great for repeating
sections of audio through the multi-tap delay line.
