When Loading the Original on the platen glass:
• Before scanning:
When you select 2-sided for 2-sidedPrintSetting and the preview function is activated, the machine
starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below
(preview screen) is displayed on the LCD.
1.
Rotate
If you press the right Function button, the original rotates by 180 degrees.
2.
Rescan
If you press the left Function button, the original is rescanned.
Press the OK button to start scanning.
• After scanning:
Document setting screen appears on the LCD after scanning each sheet of original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the
platen glass, then press the OK button.
Note
• If you do not need more scanning, press the left Function button. The machine starts copying.
• You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
429
