Aligning the Print Head Manually
If printed ruled lines are misaligned or print results are still not satisfactory after adjusting the print head
position automatically, adjust the print head position manually.
Note
• For details on adjusting the print head position automatically, see Aligning the Print Head.
You need to prepare: two sheets of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Load two sheets of A4 or Letter-sized plain paper in the cassette.
After inserting the cassette into the machine, the paper information registration screen is displayed on
the LCD. Select A4 or Letter for Page size and Plain paper for Type, then press the OK button.
If a message is displayed on the screen, follow the directions in the message to complete registration.
3.
Extend the output tray extension, then open the paper output support.
4.
Select Setup on the HOME screen, then press the OK button.
LCD and Operation Panel
The setup menu screen will appear.
5. Select Maintenance, then press the OK button.
The Maintenance screen will appear.
6. Select Manual head alignment, then press the OK button.
212
