--:- / cli-> cd network/ipsec(vpn)
IPSec(VPN) Navigation Tree
ipsec(vpn)
Table 4.11: Network/IPSec(VPN) Options
Network/SNMP
Enter cd network/snmp to navigate to the snmp level.
--:- / cli-> cd network/snmp
SNMP Navigation Tree
snmp
public_v1|v2/
oid=
permission=
source=
Table 4.12: Network/SNMP Options
Wiz command
The wiz command allows administrators to easily and quickly perform the initial network
configuration of the eth0.
At the command prompt at the / level, enter wiz to view the current IP configuration. To change
the IP configuration, press Tab to move through the parameters, and press Esc + Tab to edit the
selected parameter. When you are finished, enter yes to confirm that all parameters are correct
and to save the new parameters.
--:- / cli-> wiz
Current IPv4 address: 172.26.30.249
Current IPv6 address:
eth0:
device_status = enabled
ipv4_method = dhcp
ipv4_address = 192.168.160.10
ipv4_mask = 255.255.255.0
ipv4_default_gateway =
Chapter 4: CLI Overview for Administrators 39
