Filter
Top Products
9
OPERATING YOUR WASHER
Selecting a wash time
To change the preset wash
time:
1. Press TIME SELECT
until the light glows by the time you desire.
2. Make other selections, if
desired, and press START.
Delaying the start time
You can delay the start of a wash cycle to be
sure someone will be home during the washer
operation, or until a time of day when energy
costs are lower.
To delay a cycle:
1. Fill dispensers and load the
washer. Close the lid.
(See pages 17 and 18 for information about the dispensers.)
2. Make selections for the wash
cycle you want to delay.
3. Press and hold START/DELAY
(longer than 5 seconds). When the key is
released, the light glows by Delay Hours
and the number 4. (The numbers now
represent hours of delay.) All other lights
will go off when your washer is in Delay.
The selected wash cycle will start in 4
hours.
Heavy
Normal
Light
14
12
10
8
6
4
Select
Time
PRESS
PRESS
Start
Delay
NOTE: Operate your washer only when
someone is at home.
Delay Hours
Heavy
Normal
Light
14
12
10
8
6
4
Start
Delay
Time
PRESS
AND HOLD