30
Is your water turned on?
▼
Is the power cord plugged in?
▼
Have you blown a fuse or tripped the circuit breaker?
▼
If you need more help, check the chart below.
▼
If You Need Assistance
Or Service
1. Before calling for assistance …
PROBLEM
Washer will not fill
Washer does not spin
Washer stops during
a cycle
Washer drains during
wash and rinse cycles
Fill/Wash, Rinse, Final
Rinse indicators are
blinking
CHECK THE FOLLOWING
Is your washer in LockOut?
Did you turn on your machine by pushing ON/SELECT and START?
Are the water supply hoses kinked?
Is the lid closed?
Washer pauses briefly at different times in each cycle. These
pauses are normal.
Adjust the drain hose so it is higher than the water level in the
washer.
A power failure occurred. Press CANCEL and reset the electronic
controls to complete the cycle.
IF YOU NEED ASSISTANCE OR SERVICE