Whirlpool LSE9355BQ0 Washer/Dryer User Manual


 
6
OPERATING YOUR WASHER
Starting your washer
A one-button start is available if you want to
use the settings (Regular cycle, 10 minutes
wash time, Extra Large load size, Warm/Cold
temperatures) for the “preset” cycle. Press
START and the wash cycle begins.
To make other selections:
1. Press ON/SELECT
until the light glows by the cycle desired.
2. Press SELECT
below any setting you want to change. See
pages 6-16 for additional information to help
you make selections.
3. Press START.
Stopping and restarting your washer
To stop your washer at any time, press
CANCEL.
NOTE: After pressing Cancel, repeat Steps 1-3
above to restart.
Selecting a fabric/cycle
Press ON/SELECT until the light glows by the
desired cycle (Regular cycle, 10 minutes wash
time, Extra Large load size, Warm/Cold tem-
peratures are the preset selections).
Start
Delay
PRESS
PRESS
On
Fabric/Cycles
Heavy
Perm Press
Delicates
Soak
H
and
W
ashables
Regular
Select
PRESS
Select
PRESS
Start
Delay
PRESS
Cancel
YOU SEE
T emperatureLoad SizeFabric/Cycles T ime
W ash/Rinse
Hot/Cold
Cold/Cold
Extra Large
Medium
Small
Heavy
Normal
Light
14
12
10
8
6
4
Heavy
Regular
Perm Press
Delicates
H
and
W
ashables
Soak
Warm/Warm
Warm/Cold
Hot/Warm
Preset selections