Filter
Top Products
Figure 17: Low Heat Model (120°F to 250°F) Air Flow Schematic
Utilizing -40F dew
point air to
regenerate and cool
the desiccant.
Double wall
constructed
heater housing
and desiccant
container.
Low watt density
heaters, can
operate safely with
minimum air flow.
Regeneration
thermocouple,
monitors and
controls the
regeneration
temperature
Pressure switch, makes
sure the blower is
functioning correctly.
High temperature
snap switches,
monitor the heat
status of the heater
housings.
High pressure
peripheral
regenerative blower.
Dryer valve
13X Molecular
Sieve 8x12
beads.
Process /
Regeneration
Air Filter
Optional Pre-Cooler for
Low Temperature
Operation 120F to 180F
Insulated
stainless steel
drying hopper
Return Air
Temperature
Thermocouple
Position
2-1/2”
Hose
2”
Hose
Dehumidifying Dryers 7Appendix 49 of 53