Smeg 155620 Washer User Manual


 
155620
155620
Be sure to remove transport brackets prior
rst use of the appliance. Attempted operation
of the blocked machine may result in
irreparable damage which is not covered by the
manufacturer’s warranty!
When connecting your washing machine to water
supply, be sure to use brand new water inlet hose
and appropriate sealing gaskets (attached).
Do not locate the machine in a room with
temperature below 0°C. Parts of the machine may
be damaged if frozen.
Install the washing machine in a perfectly
horizontal position, on solid at concrete oor.
Follow the instructions for correct installation and
water and mains connections.
Never immerse the end of the drain hose into the
draining water.
Prior starting the washing cycle lock the door by
pressing them at the designed spot.
Door may not be open during the washing cycle.
Use only detergents and softeners for
machine wash. Manufacturer may not assume
responsibility for any damage and eventual
discoloring of gaskets and plastic components as
a consequence of incorrect use of bleach and/or
coloring agents.
For removal of lime residues use such agents
with added anti-corrosion agents. Follow the
manufacturer’s instructions. Finish the lime
removal by multiple rinsing to remove completely
eventual acid residues.
Never use detergents containing solvents, since
there is a danger of creating toxic gasses which
may damage the machine and result in ignition or
explosion.
Upon completion of washing operation close the
water faucet.
4
5
Cautions