Filter
Top Products
155620
155620
Permanent suspension - change of program
By turning the program selector to the position
“0” the program is permanently suspended.
Consequently you may select a new program
(see Program selection).
•
Failures
Program is suspended in case a failure occurs.
This is signalled by the relevant reading
on the display and a sound signal (see cf.
Troubleshooting).
•
Power failure
If a power failure occurs the washing program is
interrupted, and when the power is restored the
program is automatically resumed where it had
been interrupted.
If a power failure occurs when the drum is
still full of water, be careful not to open the
door before you pump the water out.
After certain time you may open the door if the
water level in the drum is low enough, otherwise
you must st empty the water (use additional
program Pumping water out or Spin .
MA (models with the door opening by pressing the
G knob feature the function which enables you to
open the door of the appliance during power failure
using special lever, located adjacent to the lter.
•
Setting the time of day
- Press MENU (B) and QUICK knobs (D), and turn
the program selector (A) to the rst clockwise
program. Display reads CLOCK and =00:00 (hh:
mm) in the right corner.
- Hours start ashing; push the SELECTION knob
(C) to set the time of day.
- Conrm setting by pushing the MENU knob (B).
22
23
Special functions
(certain models only)