Filter
Top Products
155620
155620
In case you were not successful in repairing the
malfunctions in spite of the above suggestion chart,
call the nearest authorized service shop.
Repairing the failure arising from inappropriate
connections or use of the appliance is not covered
by the guarantee, and the repair expenses are paid
by the customer.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
30
31
Failure Possible cause Remedy
Detergent residues
in the dispenser.
Low water ow pressure.
Some detergents may stick
to the dispenser rather hard
if it is wet.
• Clean the inlet pipe screen.
• Wipe the dispenser prior
loading detergent.
Softener is not
completely rinsed,
or water is left in
the dispenser dish.
Sucking cover is not correctly
positioned or is clogged.
Clean the dispenser and rmly x
the cover to its place.
Washing time is
longer than usual.
The machine switched on
the UKS* system because of
uneven laundry load.
Power failure occurred.
Clean water sensor is
engaged.
Washing program time may be
prolonged for 10 minutes and the
machine still functions perfectly.
Time is prolonged for the power
failure period.
Time is prolonged for extra
rinses.
Washing program
does not start.
FAILURE 2
Door is not properly closed. Push it towards the machine.
Water does not
enter the machine.
FAILURE 3
Disturbed water inlet. Check if:
• the water faucet is open,
• inlet pipe net lter is clean.
(Push the START button again).
Water is poorly
pumped out or not
at all (machine
signals
FAILURE 7).
Water outlet is clogged. Check if:
• the lter is clean,
• outlet pipe is not jammed,
• outlet pipe is positioned higher
than 1 m.
(Push START knob again).