Filter
Top Products
155620
155620
30
31
Failure Possible cause Remedy
The machine
moves during
operation.
The machine is not properly
leveled.
Transport brackets are not
removed.
Level the machine with the
adjustable legs.
Remove transport brackets.
The machine
vibrates during the
spin.
Unevenly distributed laundry,
especially with very small
quantities (for ex. only the
bathrobe).
This is normal, the machine will
reduce the RPM if vibrations are
too strong. Wash larger quantity
of laundry.
Excessive foaming
during washing.
Excessive measure of
detergent.
Use washing powder according
to the instructions by the
producer and according to the
water hardness and soiled
laundry.
Use only detergents for machine
washing.
Laundry is not
properly spun.
No failure is
reported.
The machine switched on
the UKS* function. Because
of bad laundry balance, the
machine has automatically
reduced spin RPM.
The machine operates normally.
Wash large and small pieces of
laundry together.
Greasy wads
appear on the
laundry.
Too little detergent (laundry
was very greasy).
Wash the laundry again.
Add more detergent for such
soiled laundry, or use liquid
detergent.
Laundry is stained
after washing.
You used liquid detergent or
detergent for colored laundry
which does not contain
whitener. You selected
inappropriate program.
Use the detergent containing
whitener.
Select the heavily soiled laundry
program, or activate soaking
function.
White powdery
residues on the
laundry.
It is not the consequence of
bad rinsing, but because of
neo-phosphate detergents
containing non soluble
components (zeolites) for water
softening. Such substances
may be deposited upon
the laundry. Inappropriately
selected program.
• Immediately rinse the laundry
once again.
• Use liquid detergents which do
not contain zeolites.
• Try removing the residues with
the brush.
• Use program for heavily soiled
laundry, or activate soaking
function.