Filter
Top Products
155620
155620
in bold (spin RPM, extra rinse, more water, sound
signal). Using the SELECTION knob (C) you may
change settings. Activation of a particular function is
conrmed by the relevant symbol appearing on the
display. Function is deactivated by another pressing
the SELECTION knob (C).
Reduced spin RPM / Rinse hold
Best recommended spin RPM for the selected
program appear on the display. Using the button (C)
in some models you can increase the selected RPM
(1300-1800) or reduce in steps till “0”, when all
spins are off. Last selection is “pump stop” meaning
that laundry will remain soaked in the last rinse
water.
RINSE HOLD function is selected if you want the
laundry not to be excessively creased in case you
are unable to remove it from the drum immediately
after the end of washing cycle. This is specially
handy for washing of synthetics and delicate
laundry . However, it is not recommended for
wool or manual wash .
Extra rinse/ Clean water sensor
This function is for persons, especially sensitive
to detergents. Using the SELECTION knob (C)
you may select one or two extra rinses, or activate
the Clean water sensor (S) - certain models only.
By activating extra rinse the display indicates
adequately increased quantity of water. If the clean
water sensor is activated, the display indicates the
symbol “S” instead of water quantity. In such cases
the machine will select appropriate number of rinses
in relation to how clean is rinsing water, detected
(measured) by the sensor.
Higher water level (Water plus)
For washing heavily stained laundry.
Using the SELECTION knob (C) you may increase
quantity of water for rinsing one or two times more;
14
15