Filter
Top Products
155620
155620
START knob (F) and the machine will nish the
program with the spin, determined by that particular
program.
In case you would like to alter the washing program,
turn the program selector to the position “0”,
followed by the selection of rinse or merely pumping
the water out.
If a power failure occurs during the
washing program, when the power is
restored the machine will resume the
execution of a program where it had been
interrupted.
- End of operation
•
Sound signal indicates that you may now open
the door of the machine.
•
Extract the laundry from the drum and remove
any alien objects from the door gasket.
•
Leave the door ajar to allow the interior to dry.
•
Close the water inlet faucet.
•
Switch the machine off by turning the program
selector (A) to position “0”.
•
By the user
Temporary interruption
By pressing the START/PAUSE knob (F) the
program may be suspended at any time.
If the Child lock is engaged you have to deactivate it
rst. Display reads PAUSE.
After certain time you may open the door if the
water level in the drum is low enough, otherwise
you must st empty the water (use additional
program Pumping water out or Spin .
By pressing the START knob (F) the program is
continued where it had been interrupted.
20
21
Interruptions