Filter
Top Products
How to use
18
Child lock
• Child lock is used in order to protect the washing cycle from the effects of unwanted
button activations during the cycle. The Child lock is activated by pressing the Extra rinse
and Start/pause buttons on the control panel at the same for more than 3 seconds.
• When child lock is activated LEDs on the function buttons will flash to indicate that Child
Lock is active.
• When any of the programmes are running and the child lock is active, if another
programme is selected after programme dial is switched to the Stop position, the
programme already running will continue.
• In order to deactivate the Child lock, the same buttons, (Extra rinse and Start/pause),
should be pressed again for more than 3 seconds.
• Deactivation of Child lock is shown by flashing of the LED on the Start/pause button.
Important note
Your machine will inactivate the temperature and function buttons when the child lock is
activated.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com