To obtain the best washing results, you must operate your washer properly. This section
gives you this important information.
Preparing clothes for washing
• Close zippers, snaps, and hooks to avoid snagging other items.
• Remove pin, buckles, and other hard objects to avoid scratching the washer interior.
• Empty pockets and pull them inside out.
• Turn down cuffs and turn synthetic knits inside out to avoid pilling.
• Reverse textiles such as pants, knitwear, t-shirt and sweat suit
• Tie strings and sashes to avoid tangling.
• Treat spots and stains. (See ‘Removing stains’ section).
• Follow the washing instructions supplied on the clothing
Important note
Faults that emerge due to the penetration of foreign objects will void the manufacturer’s
guarantee
• Separate heavily soiled items from lightly soiled ones, even if they would normally be
washed together.
• Separate dark colours from light colours, colourfast items from non-colourfast item
• Wash lint producers and lint collectors separately.
Loading clothes for washing
• Drop items into the washer loosely. Items should move easily through wash water for
the best cleaning and wrinkle-free results.
• Load washer properly and select the correct load size setting.
• Overloading and selecting a setting too small for the wash load can :
• Cause poor cleaning
• Increase wrinkling
• Create excessive lint
• Wear out items faster (because of pilling)
Mix large and small items in each load. Load evenly to maintain washer balance. An
unbalanced load can make the washer vibrate during spin.
How to use
11