Filter
Top Products
How to use
15
Start/pause button
Used to start a selected program or pause during operation.
Important note
• If you want to cancel/reset a programme after it has started, press the Start/pause
button, turn the programme dial to the stop.
• Wait a while Ready light goes out, turn the dial to the required new programmed,
wait again while the Red light comes on and the press the Start/pause button.
• Once a new programme is selected the product will discharge the water from the old
programme
Auxiliary function buttons
Rinse hold
• This function is recommended to be used when the laundry cannot be removed
immediately after the end of a programme, as this will prevent creasing.
• When this button is pressed, the last rinsing water is not drained. For the program to
continue after it gets to this point, repress the Rinse hold button.
Note
If you do not want your sensitive clothes to be spun or you want them to spin gently,
turn the programme dial to Stop position. Then turn the dial to the drain or spin
programme and press the Start/pause button. If the program you have selected is the
Drain programme, your machine will drain the water. If you have selected the Spin
programme, your machine will perform a spinning operation and then end the program.
Extra rinse
You can have an extra rinse completed in addition to the rinses to the ones in the different
washing programmes by simply pressing the Extra rinse button.
Easy iron
By using this function, you clothes will be less wrinkled after washing, (if taken out
immediately after the programme it has been selected with has finished).
Important note
• If you forget to use any of the additional functions before a programme has started,
press the additional function button you require. If the indicator light of the function
button you have pressed stays on the additional function will be activated, if the
indicator light flashes or flashes and goes out then the additional function will not be
activated.